High Quality Fiber Fusion Sleeves
Basic Info
Model No.: FOSP-HSS-12
Product Description
Fiber Optic Heat Shrink Tubing commonly known as Single Fiber Optic Heat Shrink Sleeves, fiber optic protective heat shrink sleeves or fiber optic fusion splice protective heat shrink sleeves, is designed for FTTH fiber Junction protective components. Fiber Optic Fusion Splice Protection Sleeves is Consist of cross linked polyolefin, Hot fusion tubing and Stainless Reinforcing Steel Rod which keep optic transmission properties of optic fiber and enhance the protection to optic fiber splices. Easily operating to the optic fiber during installation without damaging and clear sleeve make it easy to detect splice before shrinkage. Sealing structure make the splice free from influence of temperature and humidity in special environment.
High Quality of Single Fiber Optic Heat Shrink Sleeves
Obvious advantages:
1. The tubes are clear enough to help viewing the fiber color clearly, improve work efficiency.
2. There is no air between outer tube & inner tube because we pre-exhaust air, stiffness of connection and quickness of assembly the basic advantages of this solution.
3.The advantage of that no bubbles after shrinking is helpful for prolong the steel needle from damaged and corrosioned.
4. Steel with high quality can support fiber much better because it has a higher hardness, can protecting the fiber from damage and contaminants.
5. This new type will help you cutting down your fiber lost and improve work efficiency as well.
Features
Optic fiber heat shrinkable sleeves is used to protect the fiber optic joints. Move the heat shrink sleeves to the fiber optic connector, let the melting point of the heat shrinkable sleeves in the middle, gently straighten the fiber connector, put into the heater and heating. The EVA inner tube is melted, and the polyethylene pipe is tightly sleeved on the connecting optic fiber after shrinking. Since there is a stainless steel rod in the tube, it not only increases the tensile strength (1000~2300g). At the same time, can protective the fiber from being bending.
1, does not affect the characteristics of the fiber optic light guide.2, the protection of the splice points, to improve the mechanical strength.
3, simple operation, reduce the risk of fiber damage during installation.
4, the transparent casing, so that the fiber connection status at a glance.
5, the sealing structure continue to have a good resistance to temperature, humidity performance.
Application scope:
Mainly used in fiber optic closures, fiber optic terminal boxes, ODF boxes, broadband network boxes, cable junction boxes ect. For communication products welding, special designed for FTTH project.
FAQ
We usually quote within 48 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
2.How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality.
3.How long can I expect to get the sample?
After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 2-4 days. The samples will be sent to you via express and arrive in 4-8 days. You can use your own express account or prepay us if you do not have an account.
4.What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. Generally speaking, production lead time is within 2~4 weeks.
5.What is your terms of delivery?
We accept EXW, FOB, CIF, DDU, DDP etc. You can choose the one which is the most convenient or cost effective for you.
6.Terms of payment?
We accept payment as the following.
1).30% T/T deposit, 70% balance before delivery.
2).100% TT in advance.
3).western union
Product Categories : Heat Shrinkable Tubing > Heat Shrink Sleeves